* FDA approved red light therapy* Daisy-Chain design: maximum 6 units RDS1000 together* Simple 2 switches controller* 3 mode: red / infrared / combo red and infrared for options* Optical convex lens for evenly distributed light* High-quality output (irradiance), best result with shorter treatments time* Easy Set-Up: door mount, wheeled stand options* Worldwide use 100-240V
LED Light Therapy RDS1000 Parameters
MODEL: | RDS1000 |
LED Power: | 1000W |
Wavelengths: | 42mil RED 660nm & NIR 850nm = 1 : 1 |
Amps @110v: | 2.1A |
Amps @220v: | 1.1A |
LEDs: | 200 x 5W |
Power Consumption: | 235W |
Dimensions: | 18.9″ x 8.7″ x 2.3″ |
Beam Angle: | 30 Degree |
Cooling Fans: | 3pcs fan |
Irradiance(mW/cm2) : | 145 |
Lifespan: | 100000hrs |
EMF Emission: | Negligible |
Warranty: | 3 Years |
Weight: | 4.5KG/9.9LBS |
Max Area: | 46″ x 34″ |
Best For: | Targeted Treatment |
Daisy-chained: | Maximum 5pcs |
Door Mount: | Yes |
Wheeled Stand: | No |
Built-in Programmable Timer: | No |
New Wheeled Stand for massage table/bed: | No |
Package Contents: | Carton |
Accessories | (1)RDS1000 Red Light Therapy Device (2) Patch Cable (3) Cable Assembly & Snap Links(4) Power Cable (5) Eye Protection (6) Hanging Hardware (7) Door Hook |
Installation Method Video Show
Barrow Therapy Light Installation Mode
Hoisting Installation mode
FDA Approved Red Light Therapy Devices Use Scenes
Setting up Your RDS Series Light

1. Plug the power cord into the female socket of your therapy light. 2. Plug the other end of the power cord into a wall socket. 3. RDS light has two red power switches, both on the same side of the power cord socket. Each switch controls 50% of the LEDs in the light. One control all RED LEDs, and the other control Infrared LEDs. 4. Press the switches, the light fixture will work in full power
1. Line up the threaded posts with the holes in the end caps of the upper device. Then, slide the lower threaded posts into the holes, and slide forward to lock them in place. 2. Plug the connecting cable to the socket on the lights. 3. Plug the power cord into the female socket of the light, and the other end into a wall socket, then press the switches, the light will work.
