LED red light therapy machine 660nm is readily absorbed by skin tissue, improving skin health and collagen production. Near-infrared light 850nm is invisible to the human eye and penetrates deeper into the tissue, increasing muscle recovery and reducing joint pain.
* Daisy-Chain design: maximum 6 units RDS500 together
* Simple 2 switches controller
* 3 mode: red / infrared / combo red and infrared for options
* Optical convex lens for evenly distributed light
* High-quality output (irradiance), best result with shorter treatments time
* Easy Set-Up: door mount, wheeled stand options
* Worldwide use 100-240V
LED Light Therapy RDS1500 Parameters
| MODEL: | RDS1500 |
| LED Power: | 1500W |
| Wavelengths: | 42mil RED 660nm & NIR 850nm = 1 : 1 |
| Amps @110v: | 3.3A |
| Amps @220v: | 1.3A |
| LEDs: | 300 x 5W |
| Power Consumption: | 352W |
| Dimensions: | 27.2″ x 8.7″ x 2.3″ |
| Beam Angle: | 30 Degree |
| Cooling Fans: | 4pcs fan |
| Irradiance(mW/cm2) : | 161 |
| Lifespan: | 100000hrs |
| EMF Emission: | Negligible |
| Warranty: | 3 Years |
| Weight: | 7KG/15.4LBS |
| Max Area: | 52″ x 34″ |
| Best For: | Full Body Treatment |
| Daisy-chained: | Maximum 4pcs |
| Door Mount: | Yes |
| Wheeled Stand: | No |
| Built-in Programmable Timer: | No |
| New Wheeled Stand for massage table/bed: | No |
| Package Contents: | Carton |
| Accessories | (1)RDS1500 Red Light Therapy Machine(2) Patch Cable (3) Cable Assembly & Snap Links(4) Power Cable (5) Eye Protection (6) Hanging Hardware (7) Door Hook |
RDS Series Optional Mounting Configurations
Tabletop Stand
Door Mount
Installation Method Video Show
Barrow Therapy Light Installation Mode
Hoisting Installation mode
Setting up Your RDS Series Light
1. Plug the power cord into the female socket of your therapy light.
2. Plug the other end of the power cord into a wall socket.
3. RDS light has two red power switches, both on the same side of the power cord socket. Each switch controls 50% of the LEDs in the light. One control all RED LEDs, and the other control Infrared LEDs.
4. Press the switches, the light fixture will work in full power
1. Line up the threaded posts with the holes in the end caps of the upper device. Then, slide the lower threaded posts into the holes, and slide forward to lock them in place.
2. Plug the connecting cable to the socket on the lights.
3. Plug the power cord into the female socket of the light, and the other end into a wall socket, then press the switches, the light will work.
English
Deutsch
Nederlands
Čeština
Italiano
Français
Español
Português
Dansk
Polski
日本語
Română
Gaeilge
Magyar
Hrvatski
Български
Svenska
Slovenščina
Slovenčina
Suomi
Norsk bokmål
Íslenska