Professional One-Stop Light Therapy Solutions Manufacturer with Over 15 Years of Experience.
Optical Testing for Red Light Therapy Products
The main types of light therapy products include:
- Red Light Therapy Panels
- Red Light Therapy Beds
- Red Light Therapy Mats
- Red Light Therapy Belts
- Red Light Therapy Masks
- Handheld Red Light Therapy Devices
- Intranasal and Oral Light Therapy Devices
- Pet Light Therapy Products
Testing methods vary by product and can be customized to meet your specific requirements.
Panels: Wavelength, irradiance, uniformity, beam angle.
Beds: Wavelength, irradiance distribution, uniformity, safety.
Mats: Wavelength, surface irradiance, uniformity, bending stability.
Belts: Wavelength, irradiance, uniformity, bending stability.
Masks: Wavelength, facial irradiance, uniformity, eye safety.
Handheld Devices: Wavelength, irradiance, beam size, stability.
Intranasal & Oral Devices: Wavelength, optical power, dose, safety.
Pet Products: Wavelength, irradiance, uniformity, eye safety.
Optical Retesting Process for Red Light Therapy Products:
- Confirm Test Conditions: Keep the testing distance, angle, ambient temperature, and supply voltage consistent.
- Calibrate Test Equipment: Use a spectrometer or irradiance meter with valid calibration.
- Preheat the Product: Operate the device for 10–20 minutes until the light output stabilizes.
- Repeat Measurements: Test at least three times using the same positions and method. Use a 3×3 or 5×5 measurement grid for panels.
- Verify Key Data: Check peak wavelength, irradiance, spectral distribution, uniformity, and pulse parameters.
- Compare the Results: Compare the retest data with the original results, product specifications, and defined tolerances.
- Document the Test: Record the product model, batch number, instrument ID, test conditions, raw data, and final result.
Firsthand Test Data from a Phototherapy Factory
FAQ